The Bobcat S510 skid steer loader is a part of the M3-series.
Resources:
Bobcat S510 Specs
Engine Specs
- Power: 55 hp
- Max Speed: 7.6 mph
- Fuel Tank: 24.8 gal Diesel
The Bobcat S510 supplies 55 hp through the diesel engine.
With this power it can reach a max speed of 7.6 mph. The S510 requires diesel fuel and has a 24.8 gal gas tank.
Capacities
- Tipping Capacity: 3,754 lbs
- Rated Operating Capacity (50%): 1,790 lbs
- ROC (with 200 lb counterweight): 2,023 lbs
The Bobcat S510 has an operating capacity of 1,790 lbs but can be increased to 2,023 lbs with a 200 lb counterweight. The tipping capacity is 3,754 lbs.
Weight Specs
- Operating Weight: 6,208 lbs
The Bobcat S510 weighs 6,208 lbs. This is important if you plan to transport this vehicle; you must know the weight in order to insure a trailer and truck that can support this weight.
Dimensions
- Height: 77.8 in
- Width w/bucket: 68 in
- Width: 64.7 in
- Length w/o attachment: 104.6 in
- Length w/bucket: 133 in
- Reach at Max Height: 17 in
- Turning Radius: 80 in
- Wheelbase: 42.6 in
Knowing the height of you vehicle is important as well because you need to understand how it can maneuver and fit either during transportation or on site.
The Bobcat S510 is 77.8 inches high, 68 inches wide, and 133 inches long with a standard bucket.
It can reach out 17 inches at the max weight.
Design
Interior Design
The interior design of the S510 is fairly simple. There is not too many special features in this skid steer. This loader has the standard foot pedals and steering levers for main controls.
There is the ability to upgrade to the Selectable Joystick Controls (SJC) or the radio remote control.
For the operator there is a mechanism suspension seat. And for additional comfort, you can opt to add a heated/air conditioned cab or sound reduction package.
You may be able to also add a radio in the system as well as a delux panel.
Performance Design
The S510 comes standard with the trademarked BICS (Bobcat Interlock Control System) which connects the system, seat bar, valve and traction.
There are only front and rear lights to help with operation during early mornings and late nights. But you may be able to add a side lighting kit.
And for added protection of the operator and equipment it is ROPS and FOPS approved.
Attachments
The process of changing the attachments is very easy using the standard Bob-Tach mounting system. The entire process of swapping an attachment takes only about a minute with this mounting system. You may be able to upgrade to a Power Bob-tach system.
A fingertip auxiliary hydraulics control and pressure release hydraulic quick couplers come standard.
The Bobcat S510 comes with a range of attachments which can be seen in the list below.
Compatible Attachments
3 Point Adapter
- 3 pt Hitch, Category I & II
Angle Broom
- 68″ Angle Broom
- 84″ Angle Broom
Auguer
- 15C Auger Drive Unit
- 15H Auger Hex Drive Unit
- 30C Auger Drive Unit
- 30H Auger Hex Drive Unit
- 35PH Auger
Backhoe
- 7BH Backhoe
- 9BH Backhoe
- Bob-Tach Mounted Backhoe
Box Blade
- Box Blade
- Box Blade w/Laser Mounting
Brushcat Rotary Cutter
- 66″ Brushcat (Std Flow)
- 72″ Brushcat (Std Flow)
Bucket
- 62″ Combination Bucket
- 68″ Combination Bucket
- 62″ Heavy Duty Bucket
- 74″ Heavy Duty Bucket
- 68″ Light Material Bucket
- 74″ Light Material Bucket
- 80″ Light Material Bucket
- 86″ Light Material Bucket
- 68″ Heavy Duty Bucket
- 62″ Standard Duty Bucket
- 68″ Standard Duty Bucket
- 74″ Standard Duty Bucket
- 36″ MX4 XCHG Grading
- 9″ Trenching Bucket, pin on, 2 bolt-on teeth
- 12″ Trenching Bucket, pin on, 2 bolt-on teeth
- 16″ Trenching Bucket, pin on, 2 bolt-on teeth
- 18″ Trenching Bucket, pin on, 2 bolt-on teeth
- 20″ Trenching Bucket, pin on, 2 bolt-on teeth
- 12″ MX2 XCHG Smooth
- 12″ MX3 XCHG Smooth
- 16″ MX2 XCHG Smooth
- 16″ MX3 XCHG Smooth
- 18″ MX3 XCHG Smooth
- 20″ MX2 XCHG Smooth
- 20″ MX3 XCHG Smooth
- 24″ MX2 XCHG Smooth
- 24″ MX3 XCHG Smooth
- 30″ MX3 XCHG Smooth
- 36″ MX3 XCHG Smooth
Chipper
- 5A Chipper, Standard Flow
Digger
- 25″ Digger
- 30″ Digger
- 36″ Digger
Dozer Blade
- 80″ Dozer Blade, 6-way
Grader
- Grader 84″
Grapple
- 55″ Utility Grapple
Hydraulic Breaker
- HB880 Hydraulic Breaker with Nail Point
- HB980 Hydraulic Breaker with Nail Point
Nitrogen Breaker
- NB150 Nitrogen Breaker with Nail Point
- NB160 Nitrogen Breaker with Nail Point
Snow Pusher
- Snow Pusher Pro, 6 ft
- Snow Pusher Pro, 8 ft
- Snow Pusher, 8 ft
Snow V-Blade
- 72″ Snow V-Blade
- 60″ Snow V-Blade, 7 pin
- 84″ Snow V-Blade
Snowblower
- Snow Blower 32X60
- Snow Blower 32X74
- Snow Blower 32X80
Soil Conditioner
- Soil Conditioner, 72 in Hydraulic Angle and Depth
- Soil Conditioner, 72 in Manual
- Soil Conditioner, 84 in Hydraulic Angle and Depth
Spreader
- HS8 Spreader
Steel Tracks
- 10×16.5 tires
- 31 – 12 x 16.5 tires
Stump Grinder
- SG 60 Stump Grinder
Sweeper
- Sweeper Bucket 72″
Tiller
- Rotary Tiller, 62 in
- Rotary Tiller, 76 in
Tree Spade
- 32″ Convertible Tree Space, Cone
- 32″ Convertible Tree Space, Modified
- 36″ Convertible Tree Space, Cone
- 36″ Convertible Tree Space, Modified
Trencher
- Trencher LT313
Utility Fork
- 60″ Utility Fork, 8 teeth
- 66″ Utility Fork, 9 teeth
- 72″ Utility Fork, 10 teeth
Vibratory Roller
- 48″ Vibratory Roller w/Padded Drum
- 48″ Vibratory Roller w/Smooth Drum
Others
- Hydraulic Clamp
- Concrete Mixer
- Model 25 Dumping Hopper
- Packer Wheel
- Sod Layer
- Tilt-Tatch accessory
- Trench Compactor
- Quick-Tach Water Kit
