The 753 Skid Steer is a non-current model skid steer offered by the company. Due to it being older, there is limited information available on it.
This article provides everything I’ve found on the website and brochure.
There appear to be two versions of the 753 that are available. The first is one from 1989 and the G-Series.
The differences between the two seem to be quite minimal. The main differences are in the overall length and weight.
Either way, all information is taken from the Bobcat website.
Resources:
Bobcat S753 Specs
Engine Specs
- Power: 40 hp/43.5 hp
- Fuel Tank: 14 gal (53 L) Diesel
The Bobcat S753 supplies 40 hp through the diesel engine.
The 753 requires diesel fuel and has a 23.9 gal gas tank.
Capacities
- Tipping Capacity: 2,612 lbs (1,184.8 kg)
- Rated Operating Capacity (ISO): 1,300 lbs (589.7 kg)
The Bobcat 753 has a tipping capacity of 2,612 lbs which means that the vehicle will not be able to lift and will physically tip forward if exceeded. However, the operation capacity is the actual safe capacity that can be loaded on the skid steer.
The operating capacity is usually around 50% of the tipping capacity.
The operating capacity (ISO) of the Bobcat 753 is 1,300 lbs.
Weight Specs
- Operating Weight: 4,330 lbs (1,964 kg)/4,740 lbs
The Bobcat 753 weighs 4,330 lbs. This is important if you plan to transport this vehicle; you must know the weight in order to insure a trailer and truck that can support this weight.
Dimensions
- Height: 76.1 in (193.2 cm)/ 77 in
- Width: 54 in (119.4 cm)/ 55 in
- Length: 96.02 in (307.5 cm)/120.5 in
Knowing the height of you vehicle is important as well because you need to understand how it can maneuver and fit either during transportation or on site.
The Bobcat 753 is 76.1 inches high, 54 inches wide, and 96.02 inches long with a standard bucket.
Design
Interior Design
The 753 is a fully closed skid steer with a seat bar, seat belt and suspension seat included for the driver.
Performance Design
There main features are:
- Auxiliary hydrualics
- Backup alarm
- Bob-tach system
- Flotation tires
- Lift arm stop
- Lights
- Monitor system
- Spark arrestor muffler
Attachments
The Bobcat 753 comes with a range of attachments which can be seen in the list below.
The process of changing the attachments is very easy using the standard Bob-Tach mounting system. The entire process of swapping an attachment takes only about a minute with this mounting system.
Here is a full list of attachments available with the Bobcat 753:
- Angle Broom
- Backhoe and Stabilizer
- Buckets
- Combination Bucket
- Earth Auger
- Front Scarifier
- Grapple and Fork
- Hydraulic Breaker
- Landscape Rake
- Pallet Fork
- Sweeper
- Vibratory Roller
